Ball Milling Grooving Cnc Carbide Inserts P3200 D08 D10 D12 D16 D20 D25 D30 Cast Iron Black

Quick Detail:

• High quality materials
• Efficient and stable
• Precision grinding
• Wear resistant and durable
• Complete specifications
• Strong universality
• High cost performance

Description:

• The p3200 cnc carbide inserts adopt high-quality nano coating, which is tough, wear-resistant and stable in quality. It is widely used in the rough and finish machining of alloy steel, tool steel, mold steel, castings and other materials; The imported tungsten steel base material is selected, which has the characteristics of high hardness, good wear resistance, high stability, sharp edge, good stability during cutting, high temperature resistance, thermal shock resistance, oxidation resistance, smooth chip during processing, and no sticking to the knife, so as to improve the service life of the blade; The screw offset fastening design makes the blade close to each other and increases rigidity to ensure that the blade does not crack and is easier to process.

Specifications:​

Lead Time:

Notice:

• The cnc carbide inserts shall not be collided or dropped on the ground and must be handled with care.
• Before installing the cnc carbide inserts, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the cnc carbide inserts are firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the cnc carbide inserts are not used, hang the blade vertically on the dry shelf.

Applications:

Our cnc carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:

FAQ